Parth Purohit
Bis 2023, Master Thesis, TU Braunschweig
Braunschweig, Deutschland
Über mich
Hello, I am a CFD engineer, who is passionate about the application of CFD in various areas such as Aerodynamics, Automotive, Aeroacoustics, etc, to solve real-world problems. I have very good experience in Mesh generation using different Meshing software, in using various commercial and non-commercial CFD software/solvers, as well as in post-processing these CFD results using Post-Processing software. In the future, I am looking forward to combining CFD with ML/Data Science, to make this world a better living place. If you would like to find out more about me feel free to message me or send me an email. Email id: parth0208purohit@gmail.com Thank you for stopping by my profile. Have a nice day. Kind regards, Parth
Werdegang
Berufserfahrung von Parth Purohit
6 Monate, Feb. 2023 - Juli 2023
Master Thesis
TU Braunschweig
Topic: Numerical Investigations of Fouling-Induced Roughness on a Compressor Stage 1) The meshing of CAD geometries in Autogrid, including a grid convergence study 2) Assessing the need for including IGV in flow simulation 3) Simulation of best fit numerical roughness in DLR-TRACE solver 4) Investigation of different operating points and configurations of smooth and rough compressor blades 5) Validation of various test results with the experimental data Software: Autogrid, DLR-TRACE Solver, TecPlot 360
4 Monate, Feb. 2023 - Mai 2023
Student Research Assistant
TU Braunschweig
Institut für Strömungsmechanik (ISM), TU Braunschweig, Germany Scientific Research Group - Multiphase flows and Icing 1) Meshing different Iced Aerofoils in Ansys-Workbench 2) Performing Numerical Simulations in Ansys-Fluent 3) Literature review of Iced airfoils' validation Software: Solidworks, ANSYS Workbench
6 Monate, März 2022 - Aug. 2022
Working Student
GE Aviation
Werkstudent- MUSIC-HAIC project 1) Generating different 2D and 3D geometries in CAD software 2) Mesh generation for different CAD models in ANSYS-Workbench 3) Performing CFD simulations in ANSYS-CFX 4) Validating different CFD results with experimental results Software: Solidworks, ANSYS Workbench Skills: Meshing · Numerical Simulation · Post Processing · Computer-Aided Design (CAD)
6 Monate, Jan. 2022 - Juni 2022
Student Project
Technische Universität Braunschweig
Institut für Strömungsmechanik (ISM) Junior Research Group "Physics of Laminar Wing and Fuselage“ Topic: 3D Simulation of a Wing with Hybrid Laminar Flow Control for Subsonic Short-Range Aircraft 1) Generating different 2D and 3D geometries in CAD software 2) Mesh generation for different CAD models in Pointwise 3) Running RANS-Simulation in DLR-TAU code 4) Validating different CFD results with experimental results Software: Solidworks, Pointwise, DLR TAU code, TecPlot 360
4 Monate, Sep. 2021 - Dez. 2021
Student Research Assistant
Technische Universität Braunschweig
Institut für Strömungsmechanik (ISM) Junior Research Group "Flow physics of Load reduction" 1) Carrying out numerical simulations of circulation control airfoils encountering vertical gusts 2) Executed the numerical simulations on the high-performance computing cluster 3) Analyzing the results Software: Solidworks, Pointwise, DLR TAU code Skills: Meshing · Numerical Simulation · Computer-Aided Design (CAD)
1 Jahr, Aug. 2020 - Juli 2021
Student Research Assistant
Technische Universität Braunschweig
Institut für Werkzeugmaschinen und Fertigungstechnik (iWF). 1) Simulation of the electrolyte filling process of Lithium-Ion batteries using ANSYS Workbench. 2) Developing different models in Fluent, such as Multiphase Modeling, Particle tracking by DPM. 3) Doing stress strain analysis of pouch cell by using Static structural and Dynamic structural analysis. 4) Combining Thermal analysis with structural analysis and comparing results with Fluent-Static structural results.
1 Jahr, Aug. 2020 - Juli 2021
Student Research Assistant
Technische Universität Braunschweig
Institut für Baustoffe, Massivbau und Brandschutz (iBMB). 1) Numerical simulation of a dynamic piping system to study water hammer effect by using ABAQUS. 2) Performing stress strain analysis for solid elements by using ABAQUS. 3) performing stress strain analysis for continuum shell elements by using ABAQUS. 4) Simulating water hammer effect by UDFs in ANSYS Fluent. 5) Performing Static and dynamic structural analysis in ANSYS workbench and comparing results with ABAQUS results.
Ausbildung von Parth Purohit
4 Jahre und 10 Monate, Okt. 2018 - Juli 2023
Computational Science in Engineering
TU Braunschweig
Master Thesis: Numerical Investigations of Fouling-Induced Roughness on a Compressor Stage Student Project: 3D Simulation of a Wing with Hybrid Laminar Flow Control for Subsonic Short-Range Aircraft Fluid mechanics, Solid mechanics, Thermodynamics, Java, C++, FEM, FVM, Computational Aerodynamics, Computational Aeroacoustic, CFD, Post-processing of numerical and experimental data, Differential equations, Scientific Visualisation.
4 Jahre, Juli 2012 - Juni 2016
Mechanical Engineering
Gujarat Technological University
B.E Project : Development of Hydraulic Machine for Gearbox Engagement and Dis‐Engagement for Maintenance Purpose Machine design, Fluid mechanics, Strength of materials, C language, Engineering graphics, Vector calculus and linear algebra, Industrial drafting, Material science and Metallurgy, Manufacturing Processes, Theory of machines, Power plant engineering, CAD, Control Engineering, Heat And mass transfer, Automobile Engineering, Production technology, Refrigeration and Air conditioning.
Sprachen
Englisch
Fließend
Deutsch
Gut
Gujarati
Muttersprache
Hindi
Muttersprache