Ing. Reynaldo C. Cuadros

Siemens T3000 I&C Commissioning

• Responsible for commissioning of control system Siemens T3000. • Installation of UPS, Application Servers, Thin clients, KVM, Profibus Cable, Ethernet cable. • Energize of cabinets: CRY(communications), CRK(controllers), CRB(input/output) • Perform Startup/shutdown of T3000 DCS, Troubleshooting on T3000 • Function Logic implementation and modification, configurations, forcing. • Carried out the Loop Testing of analog and digital signals

• Performed Erection and Commissioning of the Instrumentation & Control of SGT6-5000F4 Siemens Turbine rated at 200MW.

• Provided Support during I&C commissioning and start-up of the SGT6-5000F gas turbine rated at 180MW. • Responsible for operation from the Control of two (2) SGT6-4000F Siemens Gas Turbines (V84.3A) each rated at 180 MW, running by the SPPA-T2000 (Teleperm XP) Control System. • Responsible for operation of a SGT6-5000FD Siemens Gas Turbine (W501F) rated at 190 MW, running by the SPPA-T3000 Control System.

• Operated from the Control Room of two GT11NMC ABB-Alstom Gas Turbines, rated at 86 MW, running by the Egatrol 300 DCS control system. • Made Improvements and troubleshooting problems on the DCS MOD 300 • Provided Support during the Compressor upgrade to improve the efficiency from 78Mw to 86 Mw per turbine. • Carried out preventive maintenance program on main and auxiliary systems of engines • Coordinated with maintenance staff the Minor, Hot Gas Path, and Major Inspections.

• Worked with ABB vendor throughout the commissioning and start-up of Power Plant Project. • Operated two GT11NM ABB-Alstom Gas Turbine Generators, each rated at 78 MW. • Achieved experience with DCS: ABB Egatrol Hybrid Control system: Procontrol P13 + Mod 300. • Made Improvements and troubleshooting problems on DCS: Taylor ladder logic (TLL) and Configurable Control Functions (CCF). • Carried out preventive maintenance program on main and auxiliary systems of engines

• Performed preventive maintenance program on Modicon PLC´s Industrial network with Wonderware Intouch Lite Scada and its associated field instrumentation. • Carried out calibration on field instrumentation: Foxboro PH transmitters, Outokumpu and Foxboro level controllers, Endress + Hauser Level and Pressure transmitters, Fisher and Porter Magnetic Flowmeters, Amdel Nuclear Densimeters, Outokumpu Electronic ceramic Filter, Sullair air Compressor, Limitorque - Auma motorized control Valves.

• Provided support during Start-up and Commissioning of the Smelting Plant. • Achieved experience with Austmelt Technology for production of refined Tin. Besides worked with the Distributed Control System (DCS). • Performed configuration and calibration using loop calibrators and ABB Handheld communicators on: ABB Kent-Taylor smart Transmitters: Flow, Temperature, Pressure and Level Tx, Fisher Control Valves. Merrick Weightfeeders, Yokogawa Vortex and Magnetic Smart Transmitters.

Automation, Industrial Electronics