Nizar Hawat

Supported qualification of aircraft galley inserts (water heater, steam oven, espresso maker). Executed environmental, electrical power, endurance, WSB/WST and functional tests, coordinated external labs, analysed anomalies and implemented corrective actions. Managed setups with Siemens LOGO, Yokogawa loggers, programmable power supplies and grid simulators. Worked with ATA24/44 requirements, data acquisition, failure investigation and DO160 compliant reporting to improve reliability.

Subsidiary of IPECO Holdings Ltd. EASA21G/EN9100 Conducted requirements engineering to ensure project goals and specifications (DO-160, DO-254) were met, improving fault avoidance in aviation microwave heating control Performed FMECA, developed and verified bun warmer heating control. Developed and executed EPQ/EMI test plans for Level D/E embedded software and electronics in aircraft cabin systems Performed Level D software and hardware testing within ARINC429 Network, optimized cooling control systems

Onsite Support (level 2) and Remote Support (level 1) of Software / hardware incidents for Teva Pharmaceutical GmbH sites in Germany, Austria, and Switzerland Efficiently managed Tickets and increased customer satisfaction using “Service Now” Reduced Incidents backlogs after System migration. Improved the Key Performance Indicator (KPI) reporting system

Development of a Mobile Modular EEG Platform. Signal Transfer and Improvement of experimental set ups on the interface between brain and body (Hardware and Software). Supervision of Bachelor and Master Thesis Projects at the Interface between Psychology and Engineering (Computer Sc. and Electronics). Teaching Introduction to EEG and Processing of Bio Signals. Assistance in Project Proposals and Technical Purchase decisions (Servers, Super PCs...)

Energy assessment and emissions mapping of hybrid-electric airplanes. Assistance in designing and Implementing a hybrid-electric testing Laboratory. Assistance in Lecture Preparation for the Energy Science And Technology Course topics such as Energy Generation, Storage, Transport and Management. Supervision of Bachelor Thesis students in the topics of Simulation and Modeling of Airplane Piston Engines. Institute of Energy Conversion and Storage (EWS)

• Durchführung von Marktrecherchen und Analysen internationaler Markte für elektrische Leichtfahrzeuge. • Unterstützung bei der Erstellung einer Markteintrittsstrategie für den Projektpartner GEM Motors • Mitarbeit bei der Erstellung von Arbeitsdokumenten, Projektberichten und -Präsentationen. • Vorbereitung von und ggfs. Teilnahme an Projekttreffen mit internationalen Projektpartnern. • Mitwirkung bei der Erstellung von wissenschaftlichen Veröffentlichungen des Projektes.

Tutoring of the micro-combined heat and power laboratory (m-CHP). The curriculum included a colloquium before the experiment, in addition to a financial study using the annuity concept, a practical part where data was collected and the simulation of combined heat and power systems (CHP) via SIMULINK. The experiment was concluded by a comprehensive report submitted by the participants.

3D Simulation and Modeling of Mixed Electrodes Lithium Batteries As a employee in the technical department "Mitarbeiter im Technischen Dienst" and In order to acquire better understanding on mixed cathodes batteries performance, i modeled the effect of various cathodes geometries and types of Lithium compounds, and then simulated charge and discharge cycles. The work was performed under LINUX (Ubuntu) operating system using softwares such as BEST, GEODICT and MATLAB.

Tutoring of the AC machines laboratory. In addition to the colloquium the curriculum included Familiarization with laboratory components and validation of reactive circuit components effect on signal transmission. The experiment was concluded by a report submitted by the participants.

Infrarotspektroskopie Messungen, Temperatur-programmierte Desorption (TPD) Institut für Oberflächenchemie und Katalyse (IOK)

Supervision of the printing section production team (25 employees) of a petrochemical manufacturing company. I Improved efficiency, quality and reduced downtime in context of ISO 9001 and Japanese 5S (Sort, Set in order, Standardize, Sustain, Shine). In addition, I assisted in tools plus machinery upgrading, and finally i scheduled and planned regular preventive Maintenance.

Participated in testing and quality control check of the control room and protection panel board of 400KV lines.

Electrochemical energy storage (Lithium Batteries & Fuel Cells). Theoretical materials aspects, engineering product design and system optimization. Thesis topic 3D modelling and simulation of mixed electrodes batteries.

power electronics and controllers, computer architecture and programming, microcontrollers, semiconductors. thesis topic DC to AC 3 phase variable frequency inverter (hardware and software)