ISimQ GmbH

Cover Image

ISimQ GmbH

ISimQ GmbH

35 Follower

1-10 Mitarbeitende

Neuigkeiten

ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.7. Oktober 2021
ISimQ lädt Sie zu unserem "Symposium on Innovative Simulations in Turbomachinery - ISimT-21" ein, das wir auch in diesem Jahr, wegen der anhaltenden COVID-19-Situation, in verkürzter Form als Online-Meeting anbieten. Der Termin ist der 18. November 2021 von 14:00 h – 15:30 h (CET). Wir wollen Ihnen bei der ISimT-21 die folgenden Präsentationen unserer Entwicklungs- und Turbomaschinenspezialisten zeigen: 14:00 - 14:30 h: Paul Galpin - “Geometry-Sensitive and Practical Mesh Adaptation for Uns...
Posting
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.29. August 2021
ISimQ @ NAFEMS World Congress 2021 – Mesh Adaptation for Turbomachinery Pointwise (now cadence) and ISimQ have developed a mesh adaptation procedure for challenging turbomachinery CFD simulations. The adaptation creates a mesh that robustly conforms to the underlying geometry, respects locally anisotropic boundary layer mesh refinement and is driven by an adaptation sensor that accurately resolves secondary flow features. The method controls numerical error in the discrete solution by minimisin...
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.10. August 2021
ISimQ @ AEROVEHICLES 4 From 23 to 25 August 2021, the Technical University Berlin will host the AEROVEHICLES 4 conference ( https://aerovehicles4.sciencesconf.org ). On Tuesday, 24 August 2021 at 17:15 h (CET), Paul Galpin of ISimQ will present simulation results for the flow around the DrivAer car model and compare them to the experimental data of Technical University Munich. Paul performed the simulations with the geometry-sensitive mesh adaptation algorithm developed by Pointwise (now cadence)...
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.16. Juli 2021
18. Multiphase Flow – Conference & Short Course Das Helmholtz-Zentrum Dresden-Rossendorf (HZDR) veranstaltet vom 8. bis 12. November 2021 die „18. Multiphase Flow – Conference & Short Course“. ISimQ steuert zum Kurzlehrgang Vorträge zu den Themen zu “Mathematical Models for Two-Phase Flows” und „Lagrangian Two-Phase Flow Modelling“ bei. Die mehrtägige Veranstaltung am HZDR bringt Anwender aus dem Simulationsbereich und den Experimenten zusammen und fördert Diskussionen und Wissenstransfer auf ...
Posting
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.8. Juni 2021
Become a Fan of Fan2022! The design of fans has evolved to meet the increasing demands for higher efficiency machines, lower noise and high availability. In addition, many fans are now being used in safety-related applications. Variable speed is now more common, leading to additional design problems as users revisit their plants, looking at ways to upgrade the fans. The use of numerical simulation techniques is also becoming an established part of aerodynamic design processes. The “Internation...
Posting
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.27. Mai 2021
Radial Flow Turbocompressors – New Book Mick Casey and Chris Robinson of PCA Engineers Limited have published their new book titled “Radial Flow Turbocompressors: Design, Analysis and Applications”. It gives a comprehensive overview of methods for designing high-quality radial compressors. In addition to the theory, the work reflects the authors’ long-time experience in the practical aspects of radial compressor design. ISimQ has contributed to the section on CFD simulation technology. More in...
Posting
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.12. Oktober 2020
Pointwise und ISimQ haben eine neue Methode zur abbruchfehlergesteuerten Adaption von CFD-Rechennetzen entwickelt. ISimQ hat die neue Methode auf das DrivAer-Modell der TU München angewendet. Wenn Sie an der Methode interessiert sind, können Sie gerne eine E-Mail an info@isimq.com senden. Wir werden Ihnen dann ein „White Paper“ zusenden, in dem die Methode und deren Anwendung beschrieben sind.
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.17. September 2020
ISimT-20 unser “Symposium on Innovative Simulations in Turbomachinery“ findet dieses Jahr als Webinar am 19. November 2020, 15:00 h – 16:30 h statt. Themen sind die Simulation von Off-Design-Betriebspunkten, die Berechnung von Pumpencharakteristiken mit adaptierten Rechennetzen und Wärmeübergangsberechnungen an einer Turbinenschaufel. Die Anmeldung ist kostenlos durch E-Mail an isimt@isimq.com.
Posting
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.29. Juni 2020
It’s time for the Adoption of Adaption. Pointwise and ISimQ have developed an adaptation process exists that achieves the hopes and promises of CFD mesh adaptation from long ago. The procedure adapts to the underlying geometry and efficiently resolves the mesh with high aspect ratios within boundary layer regions. You can download a white paper at https://www.isimq.com/mesh-adaptation-that-works .
Posting
ISimQ GmbH
ISimQ GmbHhat einen Beitrag geschrieben.3. Juni 2020
Am 15. und 16. März 2021 organisiert die Technische Akademie Esslingen ein Seminar zur „Veränderung des Ventilatorenbaus im Zeichen der Digitalisierung“. ISimQ trägt mit einem Vortrag zur „Strömungssimulation in der digitalen Produktentwicklung - Chancen und Herausforderungen“ zu dem Seminar bei. Mehr Information zu dem Seminar (# 35271) gibt es unter dem Link https://www.tae.de/seminar/ .
Posting

XING empfiehlt folgende Unternehmen:

About ISimQ Our ideas make the difference. ISimQ is an innovative Computational Fluid Dynamics (CFD) service provider with offices in Canada and Germany. Our extensive CFD expertise is our guarantee to provide innovative simulation solutions that directly impact the profitability of product development processes. Our services...

Alle Infos ansehen

Jobs

Zurzeit gibt es keine Job-Angebote.

Bist Du auf Job-Suche? Dann guck Dir mal unsere Empfehlungen an.

Ähnliche Jobs

Standort

Größere Karte

Otterfing

Ludwig-Ganghofer-Straße 51, 83624 Otterfing, Deutschland