Leine & Linde AB

Cover Image

Leine & Linde AB

Leine & Linde AB

11 Follower

51-200 Mitarbeitende

Neuigkeiten

Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.19. August 2021
The encoder (on the left) was installed at at German industrial saw manufacturer FORTE GmbH the same year as Microsoft released Windows 3.1 and Bill Clinton was elected president of the US. The year was 1992. After 29 years of faithful service, the encoder needs to be replaced. By pure coincident, the #LeineLinde product specialist handling this replacement product request was himself born in 1992, just a few months older than the encoder. Future will tell if the modern drop-in replacement pro...

Encoder to be replaced after 29 years

A Leine Linde encoder installed in Germany in 1992, eventually needed to be replaced in June 2021. The replacement request was handled by a Leine Linde product specialist only months older than the original encoder.www.leinelinde.com
Encoder to be replaced after 29 years
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.19. Januar 2021
Our 700 series incremental encoders are well-known for the compact design, making it a very popular choice when space is limited. If you are looking for redundancy in a tight space, double 700 encoders could be your ideal solution. Read more about our customized solution for a customer in the marine industry. https://www.leinelinde.com/news/2021/compact-redundancy-with-double-700-encoders/

Compact redundancy with double 700 encoders

Double 700 encoders can provide redundancy, enable control from two different systems or provide speed information in two distinct resolutions. Mounting is no longer a problem.www.leinelinde.com
Compact redundancy with double 700 encoders
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.21. Dezember 2020
Dear customers, partners and colleagues, this year has been different in many aspects. It has been challenging, but for Leine Linde, it turned out as one of our most successful years ever. The success could not have been achieved without you. Thanks to your trust and commitment, we are looking back at a year that exceeded expectations. As the end of the year approach, we would like to express our gratitude and wish you a Merry Christmas and a Happy New Year. We are looking forward to an even be...
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.9. Dezember 2020
What is the worst environment possible for an encoder? A cold rolling steel mill may not be the absolute worst place, but due to the extremely corrosive conditions, it is still pretty bad. Not even an encoder in anodized aluminum is expected to last more than a year here. That is far from the lifetime a Leine Linde customer expects. This is the solution we came up with. Read more here: https://www.leinelinde.com/news/2020/stainless-steel-700-series/
Posting
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.1. Dezember 2020
Leine Linde has appointed HEIDENHAIN NV to new sales partner for Belgium and Luxembourg and HEIDENHAIN NEDERLAND B.V. to new sales partner for the Netherlands, effective 1 December 2020. This is a way for Leine Linde to establish a more direct presence in the Benelux market and be closer to our local customers. Leine Linde is part of the HEIDENHAIN group since 1992 and as such we share the same values, with an emphasis on high product quality and a focus on finding the solution that best fits e...
Posting
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.24. November 2020
Matthias at Leine Linde will present the recently released ESR eXtended Sensor Library, which belongs to the scalable EMS solution for robust load measurement on wind power turbines. ESR Strain sensors in conjunction with PC-based control from Beckhoff Automation = condition monitoring directly integrated into control technology. Using the ESR strain sensor with EnDat 2.2, together with the ESR eXtended C++ library for #Beckhoff TwinCAT3, you get the load measurement from the rotor blades direc...
Posting
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.17. November 2020
With a pre-mounted PROFINET cable, the installation of this PSE 993 encoder was easy for one of our customers. The cable was measured to fit the specific installation, and downtime related to the installation was minimized. It is vital to optimize the assembly time. When the cable length is known, similar solutions can be applied to most #LeineLinde encoders. Contact us if you are interested in ✔️more uptime ✔️higher productivity ✔️better profit. Read more: https://www.leinelinde.com/news/2020 ...
Posting
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.12. November 2020
The first job after studies can be challenging, but not for Pontus Ohlsson. Coming in as a graduate engineer, he felt it quite easy to start working at Leine Linde. An open and welcoming company culture, common activities, colleagues with different knowledge and experiences - all of these helped him to come in to the company and work together with others.
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.10. November 2020
Do you need your machines to operate in low-temperature applications? That is no problem for our Heavy Duty 800 series. For example, a customized version of an 865 duo encoder works flawlessly in a motor industry application in temperatures down to -50ºC. Contact #LeineLinde if you are interested in this product or a similar solution. Read more: https://www.leinelinde.com/news/2020/low-temperature-heavy-duty-duo-encoder/
Posting
Leine & Linde AB
Leine & Linde ABhat einen Beitrag geschrieben.5. November 2020
Leine Linde engineers enjoy coming up with solutions that simplify installation work, especially in challenging locations like wind turbines. This customized solution - retrofit mount provides seamless mounting and it makes retrofitting 800 series encoders much easier! The mount can be used for retrofit of any #LeineLinde 801 or 803 encoder. Contact us if you need a similar mount or a custom solution. Read more: https://www.leinelinde.com/news/2020/encoder-with-baumer-replacement-mount/
Posting

XING empfiehlt folgende Unternehmen:

Leine & Linde is a leading manufacturer of robust encoders and system electronics for industrial applications. The encoders are renowned for their accurate performance, durability and resistance to external impact in heavy-duty operations and harsh environments. Leine & Linde has a global presence on over 100 markets in all...

Alle Infos ansehen

Jobs

Zurzeit gibt es keine Job-Angebote.

Bist Du auf Job-Suche? Dann guck Dir mal unsere Empfehlungen an.

Ähnliche Jobs

Ansprechpersonen

Standort

Größere Karte

Hamburg

Am Sandtorkai 50, 20457 Hamburg, Deutschland