Anne-Clothilde Roehrig

Test Responsible for BMS (Battery Management System) equipment (From May-2017 to today): The BMS is a Great Wall Motors product. Marquardt China is developing the HW and the BMS Basic SW. This SW is used to ensure the communication and the data conversions for the Application SW. The BMS SW is developed in compliance with ISO 26262 standard.

Functional Software Tester for BMC (Battery Management Controller) equipment: The BMC is a VW Group equipment developed by Marquardt GmbH. The Role of this equipment is to supervise the other equipements (BJB, CMC). When a failure occurs the BMC should process the failure reaction (Open contactor, Switch off the cooling Pump,..) and raised the corresponding failure. The BMC SW is developed in compliance with ISO 26262 and OBD-II Standards.

Functional software Tester for BCM equipment The BCM (Body Control Module) manages the keyless access and the start system. This equipment allows the driver to unlock the doors/trunk as soon as the driver approach the car and to start it without key. My tasks were to: - Verify software specifications - Write and automate test cases - Raise problem report - Run Tests on HiL with real or simulate system

The CRDC equipment concentrates data from analogue and discrete signals remotely and then communicates this data to computer processing resources on the aircraft. It provides communication and conversion of data between different equipments by using several protocols. (AFDX, CAN, A429) My role was to write High Level Tests on AFDX part (Specifications and Scripts) and run Tests on target. Technical environment: C, Eclipse, DOORS, TPM, WireShark, ClearCase, ClearQuest, Wind River, DO 178B Level A

Team leader of Module Tests activity The project aim at helping Airbus Helicopters in the improvement of the formal process, the software design and performing the qualification testing of 3 of the MFD’s software partitions (IO, MAIN, HMI). The fulfilled objective was a certification of the platform before the end of 2013. My role was to set module test strategy and support team to resolve technical problems. Technical environment: C, RTRT, ClearCase, Redmine, Insight, DO 178B Level A

Horace (HDRV A350) is the graphical driver for the A350 functional display monitoring. Within a team of 5 people, my role was to write module tests and raise technical facts to correct the software. (SDD proofreading, Writing module tests procedures) Technical environment: C, RTRT, ClearCase, SingleStep, DO178B Level A

BARRACUDA’s Control software is used to manage alarm systems for Nuclear core using for powered submarine. My role was to write Module test procedures, Run Module Tests on target on-site. High Level Tests activity for CBTC / P201MRS Software for Lyon and Marseilles subway: My role was to realise high level test for Lyon and Marseilles subway autopilot. Update of Software Validation Plan, Technical support on-site during key milestones. Technical environment: C, BASH, QNX, EN50128 SIL 4

GADIRS (GPS Air Data & Inertial Reference System) is the inertial measurement unit for the military transport Airbus A400M. My role was to Implement the Module tests activity, Do Module tests proofreading, Update of Module test procedures, Use of Synergy Change and ClearCase, Run on target for high level, integration and Module test. Technical environment: C, Bash, RTRT, ClearCase, Synergy, Telelogic Change, DOORS, SingleStep, Trace32, Wireshark, DO178B level A and C.

PDUSW (Platform Display Unit Software) is the middleware layer between the relevant OPSW (Operating Software) and MACS2 (Thales proprietary operating system which includes various monitoring and hardware driving of the cockpit product.Within a team of 5 people, my role was to write module tests and raise technical facts to correct the software. (SDD proofreading, Writing module tests procedures) Technical environment: C, RTRT, ClearCase, SingleStep, DO178B Level A

DATALOADING partition is used to allow the loading of the other executable and the in-flight configuration of the unit. My role was to Implement the Module tests activity, Do Module tests proofreading, Update of Module test procedures, Use of Synergy Change and ClearCase, Run on target for Module test. Technical environment: C, Bash, RTRT, ClearCase, Synergy, Telelogic Change, DOORS, SingleStep, Trace32, Wireshark

This tool is used to generate wire network plan for avionic companies. My role was to Write high level and low level specifications, Implement Tool (development and tests). Technical environment: Java, XML, CSV, CADENCE, Eclipse

Embedded electronic system engineering

Electronic, Electrical and Control Engineering