
Kaushik Naresh Kumar
Fähigkeiten und Kenntnisse
Werdegang
Berufserfahrung von Kaushik Naresh Kumar
- Bis heute 4 Jahre und 6 Monate, seit Feb. 2021
PhD Candidate/Research Fellow
Norwegian University of Science and Technology
Project: Modularized, Reconfigurable and Bidirectional Charging Infrastructure for Electric Vehicles with Silicon Carbide Power Electronics (MoReSiC) Responsibilities: Design of high-power,high-efficiency DC/DC converter employing SiC MOSFETs.
- 3 Monate, Jan. 2020 - März 2020
Voluntary Intern - Simulation
Maschinenfabrik Reinhausen GmbH
• OLTC (On-Load Tap Changer) transient switching study with low and high frequency model of power transformer in EMTP/ATP simulation software for HVDC application. • Time and frequency domain comparison of transient simulation results of particular transformer model with on-site measurement. • Estimation of worst-case transient recovery voltage (TRV) during OLTC switching using macro-modelling tool (MODELS) of EMTP/ATP with a statistical approach.
- 7 Monate, Mai 2019 - Nov. 2019
Master's Thesis Student
Maschinenfabrik Reinhausen GmbH
Topic: Fault detection and localization scheme for Modular Multi-level Converter (MMC) • Quantitative analysis of fault types using closed-form computation and numerical simulation with MATLAB/Simulink, deterministic computation of thermal stresses at involved components. • Qualitative analysis of fault types using equivalent circuits, intuitive/empirical determination of fault current paths and stressed components. • Fault detection and localization based on analysis outcomes.
- 8 Monate, Sep. 2018 - Apr. 2019Maschinenfabrik Reinhausen
Research and Development Intern - Power Electronics
Project: Laboratory scale Modular Multi-level Converter (MMC) Demonstrator • Developed a Graphical User Interface (GUI) using NI LabVIEW to operate and test MMC prototype and PXIe embedded controller. • Conducted design verification and end of line tests to validate MMC submodule PCBs and wrote test reports. • Assisted in construction and assembly of MMC laboratory-scale prototype
- 1 Jahr, Juli 2016 - Juni 2017
Senior Design Engineer - Electrical
L&T Construction
• General Arrangement Drawing, Schematic diagram, Protection Scheme, Earth Mat designs, Power factor correction calculations etc. for 220kV/2x25kV and 132kV/2x25kV Traction Substations. • Coordinated with Site Engineers for proper implementation of designs and with Supply Chain Management Engineers for correct assessment of equipment quantity.
- 1 Jahr, Juli 2015 - Juni 2016
Graduate Engineer Trainee - Electrical
L&T Construction
• Trained in Overhead Electrification, Power Supply Installations, Signalling & Telecommunication of Indian Railways at L&T Construction’s Competency Development Centre (CDC) • Trained to prepare basic design drawings and design calculations for Traction Substations with compliance to relevant IEC, IEEE, IS and other Indian Railways Standards.
Ausbildung von Kaushik Naresh Kumar
- 3 Jahre und 1 Monat, Feb. 2021 - Feb. 2024
Power Electronics
Norwegian University of Science and Technology
- 2 Jahre und 5 Monate, Sep. 2017 - Jan. 2020
Electrical Power Engineering and Information Technology
Hochschule Darmstadt
Power Electronics, Switched mode power supplies, Advanced Programming Techniques, Technical management, Control drives and E-mobility, High Voltage Engineering, Power systems Operation and Control,Smart Grids and Renewable Energy
- 3 Jahre und 11 Monate, Juli 2011 - Mai 2015
Electrical and Electronics Engineering
SASTRA University
Power Electronics, Control Systems, Power System Analysis, High Voltage Engineering, Digital Electronics, etc.
Sprachen
Englisch
Muttersprache
Deutsch
Gut
XING – Das Jobs-Netzwerk
Über eine Million Jobs
Entdecke mit XING genau den Job, der wirklich zu Dir passt.
Persönliche Job-Angebote
Lass Dich finden von Arbeitgebern und über 20.000 Recruiter·innen.
22 Mio. Mitglieder
Knüpf neue Kontakte und erhalte Impulse für ein besseres Job-Leben.
Kostenlos profitieren
Schon als Basis-Mitglied kannst Du Deine Job-Suche deutlich optimieren.