Vandurit GmbHhat einen Beitrag geschrieben.30. Juli 2024
New double tool fitting VQCF2 - Vandurit ROLLFEED® turning
The new double tool fitting of Vandurit ROLLFEED® turning is using just one unit for two different applications. For example a ROLLFEED® applications together with a standard ISO grooving application without a change of toolplace on the turret.
You can see all reductions due to the new double tool fitting VQCF2 in this video:
- free tool places on turret
- no turret movements during application
- reduction of insert variation
- reduction...
Vandurit GmbHhat einen Beitrag geschrieben.24. Juli 2024
Machining with Vandurit ROLLFEED® turning: [H] twist free turning
Twist free turning with Vandurit ROLLFEED® turning. You are able to machine twist free surfaces, also in several steps. This can replace grinding in many cases. Get twist free surfaces while turning with Vandurit ROLLFEED®!
#vandurit #rollfeed #turning #machining
Vandurit GmbHhat einen Beitrag geschrieben.18. Juli 2024
"Vandurit ROLLFEED® turning - comparison with ISO turning
In the splitscreen video you can see the great advantages of Vandurit ROLLFEED® Turning vs. ISO turning very clearly."
#vandurit #rollfeed #turning
Vandurit GmbHhat einen Beitrag geschrieben.9. Juli 2024
Vandurit GmbHhat einen Beitrag geschrieben.3. Juli 2024
"Vandurit ROLLFEED® turning: ball cage [H]
Machining of a ball cage with Vandurit ROLLFEED® turning, 10 times faster than in conventional turning and with more than 5 times higher feed rate.
The material removal rate ""Q"" has been increased from 2,35 ccm/min (ISO) to 23,7 ccm/min - a improvement of 909%!"
Vandurit GmbHhat einen Beitrag geschrieben.24. Juni 2024
Machining with Vandurit ROLLFEED® turning: [H] gear
Vandurit ROLLFEED® turning in heavy interrupted cut with a very high tool lifetime.
#vandurit #rollfeed #turning
Vandurit GmbHhat einen Beitrag geschrieben.19. Juni 2024
The process "Vandurit ROLLFEED® turning": Explanation feed rates
In this video we explain the different feed rates in ROLLFEED® turning process, which are combined to increase machine speed, feed and surface quality.
#vandurit #rollfeed #turning
Vandurit GmbHhat einen Beitrag geschrieben.12. Juni 2024
Soft turning with Vandurit ROLLFEED® turning carbide insert
Machining of a roll (soft turning) with the new Vandurit ROLLFEED® turning carbide insert. Machine 5 times faster with more than 4 times increased feed rate!
Boost the material removal rate "Q" from 141 ccm/min (ISO) up to 705 ccm/min - a plus of 400%!
#vandurit #rollfeed #turning
Vandurit GmbHhat einen Beitrag geschrieben.6. Juni 2024
Vandurit HIGHFEED milling
facing and ramping a stamp from a solid block with Vandurit HIGHFEED 06690 and insert SOEW 13M510.
#vandurit #highfeed #milling
Vandurit GmbHhat einen Beitrag geschrieben.28. Mai 2024
Cast iron machining with Vandurit ROLLFEED® turning ceramics insert (special tool, not in stock!)
Machining of a brake disc (cast iron) with a Vandurit ROLLFEED® turning ceramics insert. You need less than half of machining time, you can increase the material removal rate "Q" by 129%! From 1295 ccm/min (ISO) up to 2966 ccm/min (ROLLFEED® turning).
#vandurit #rollfeed #turning
